Anti Corrosion Technology (ACT) Clamp
The STAUFF ACT Clamp is an innovative design solution for the
installation of pipework where anti corrosion properties are
paramount (e.g. offshore oil and gas exploration).
It's design, based on the tried and tested STAUFF Clamp according
to DIN 3015, offers installation time reduction and long term cost
savings due to extended service intervals.
Throughout its development, STAUFF ACT Clamps have been subject to
stringent anti corrosive testing at our in-house facilities in
In order to ensure credibility of the product, the development
process has also involved independent testing. To achieve this the
services of Sheffield Hallam University, Centre for
Corrosion Technology have been utilized.
In a controlled laboratory environment, a salt spray test has
been applied to various clamp configurations holding AISI 316
stainless steel tubing. Independent field test samples, based on a
rig in the Dutch sector of the North Sea, have also been assessed
at the Sheffield Hallam University facility. Both independent tests
have recorded positive results in favour of the attributes of the
new anti corrosive technology.
Fully detailed test reports are available upon request.
- Available in standard sizes from 6 mm to 25,4 mm (1/4 inch to 1
- Made out of flame-retardant plastic material (V0 listed in
compliance with UL94)
- Geometrically designed rubber strips in direct contact with the
pipe to avoid crevice corrosion formed under the clamp body
- No accumulation of seawater between clamp body and pipe by
formation of drainage channels to aid dispersal of seawater
- Material and construction in compliance with Norwegian offshore
standard NORSOK Z-CR-010
- ACT used in sub-sea and top-side environments
High UV stability and resistance against seawater, rain and